Keepers and Jobs (Keep4r / KP4R)
19 min readNov 9, 2020
TL;DR Unlike Keep3r, keep4r’s jobs protocol is upgradable, non-bypassable, and easier to use (with faster bonding/unbonding times).
Quick Comparison to Keep3r
Keep4rV1Jobs Contract
This contract was forked from keep3r, we removed all the coin and voting logic, and included a number of updates to make the protocol more agile.
Decoupling
We are working with partners to fully understand what they want from a keeper/jobs system and the protocol may change in the future. Our decoupled design means we wont have to to issue a new coin when updating either the protocol or the governance systems. This advantage provides us with agility far beyond our competitors.
Bonding improvements
We view the bonding and unbonding process as a necessary hurdle to become a keeper. This process protects the integrity of the system, by giving time for disputes (and in extreme scenarios punishment). However as many critics have pointed out the Keep3r bonding/unbonding times are too long, but there is no consensus on how long this time should be. Our solution is to expose the Bonding and unbonding delay variables to the governance system allowing the community to vote and adjust the time as needed. It’s unlikely that keep3r’s times are in that goldilocks zone.
Optimizations
In a system about calling smart contract functions for profit, gas optimisation is important. We have made a few small optimisations, removing unneeded checks and remaining bloat. Going forwards we look to further optimise and update the protocol in future versions.
Backwards compatibility
An important question for smart-contract developers is: if the protocol contract can be upgraded then will the current version become obsolete? The short answer is no, all future versions must conform to the current contract interface, and keepers will be able to work on the legacy protocol.
How to become a keeper?
A new keeper should call bond(address bonding, uint amount) entering the address of token they wish to bond with, and the amount they wish to bond. It is possible to bond 0, however this may make you ineligible for certain jobs.
Contracts:
Addresses and sources can be found via etherscan:
- KeeperV1Jobs
- address:
0x6921B6A7bD3f39dEE1f883f3C4FCb35B2dFabbbA - KeeperJobsHelper
- address:
0x63B0f1ceCF0afd44096806647Eb6E8928163875b
// Keep4r Jobs V1 Beta 🚀
// This fork of keep3r decouples the coin from the protocol,
// disables governance bypassing, and has configurable bonding times.
//
// More information @
// - https://docs.kp4r.network/Jobs.html
// Find a list of featured jobs @
// - https://kp4r.network/#/jobs
pragma solidity ^0.6.6;
// From https://github.com/OpenZeppelin/openzeppelin-contracts/blob/master/contracts/math/Math.sol
// Subject to the MIT license.
library SafeMath {
/**
* @dev Returns the addition of two unsigned integers, reverting on overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint a, uint b) internal pure returns (uint) {
uint c = a + b;
require(c >= a, "add: +");
return c;
}
/**
* @dev Returns the addition of two unsigned integers, reverting with custom message on overflow.
*
* Counterpart to Solidity's `+` operator.
*
* Requirements:
* - Addition cannot overflow.
*/
function add(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
uint c = a + b;
require(c >= a, errorMessage);
return c;
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting on underflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot underflow.
*/
function sub(uint a, uint b) internal pure returns (uint) {
return sub(a, b, "sub: -");
}
/**
* @dev Returns the subtraction of two unsigned integers, reverting with custom message on underflow (when the result is negative).
*
* Counterpart to Solidity's `-` operator.
*
* Requirements:
* - Subtraction cannot underflow.
*/
function sub(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
require(b <= a, errorMessage);
uint c = a - b;
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint a, uint b) internal pure returns (uint) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint c = a * b;
require(c / a == b, "mul: *");
return c;
}
/**
* @dev Returns the multiplication of two unsigned integers, reverting on overflow.
*
* Counterpart to Solidity's `*` operator.
*
* Requirements:
* - Multiplication cannot overflow.
*/
function mul(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
if (a == 0) {
return 0;
}
uint c = a * b;
require(c / a == b, errorMessage);
return c;
}
/**
* @dev Returns the integer division of two unsigned integers.
* Reverts on division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint a, uint b) internal pure returns (uint) {
return div(a, b, "div: /");
}
/**
* @dev Returns the integer division of two unsigned integers.
* Reverts with custom message on division by zero. The result is rounded towards zero.
*
* Counterpart to Solidity's `/` operator. Note: this function uses a
* `revert` opcode (which leaves remaining gas untouched) while Solidity
* uses an invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function div(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
// Solidity only automatically asserts when dividing by 0
require(b > 0, errorMessage);
uint c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint a, uint b) internal pure returns (uint) {
return mod(a, b, "mod: %");
}
/**
* @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
* Reverts with custom message when dividing by zero.
*
* Counterpart to Solidity's `%` operator. This function uses a `revert`
* opcode (which leaves remaining gas untouched) while Solidity uses an
* invalid opcode to revert (consuming all remaining gas).
*
* Requirements:
* - The divisor cannot be zero.
*/
function mod(uint a, uint b, string memory errorMessage) internal pure returns (uint) {
require(b != 0, errorMessage);
return a % b;
}
}
contract ReentrancyGuard {
// Booleans are more expensive than uint256 or any type that takes up a full
// word because each write operation emits an extra SLOAD to first read the
// slot's contents, replace the bits taken up by the boolean, and then write
// back. This is the compiler's defense against contract upgrades and
// pointer aliasing, and it cannot be disabled.
// The values being non-zero value makes deployment a bit more expensive,
// but in exchange the refund on every call to nonReentrant will be lower in
// amount. Since refunds are capped to a percentage of the total
// transaction's gas, it is best to keep them low in cases like this one, to
// increase the likelihood of the full refund coming into effect.
uint256 private constant _NOT_ENTERED = 1;
uint256 private constant _ENTERED = 2;
uint256 private _status;
constructor () internal {
_status = _NOT_ENTERED;
}
/**
* @dev Prevents a contract from calling itself, directly or indirectly.
* Calling a `nonReentrant` function from another `nonReentrant`
* function is not supported. It is possible to prevent this from happening
* by making the `nonReentrant` function external, and make it call a
* `private` function that does the actual work.
*/
modifier nonReentrant() {
// On the first call to nonReentrant, _notEntered will be true
require(_status != _ENTERED, "ReentrancyGuard: reentrant call");
// Any calls to nonReentrant after this point will fail
_status = _ENTERED;
_;
// By storing the original value once again, a refund is triggered (see
// https://eips.ethereum.org/EIPS/eip-2200)
_status = _NOT_ENTERED;
}
}
interface IERC20 {
/**
* @dev Returns the amount of tokens in existence.
*/
function totalSupply() external view returns (uint256);
/**
* @dev Returns the amount of tokens owned by `account`.
*/
function balanceOf(address account) external view returns (uint256);
/**
* @dev Moves `amount` tokens from the caller's account to `recipient`.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transfer(address recipient, uint256 amount) external returns (bool);
/**
* @dev Returns the remaining number of tokens that `spender` will be
* allowed to spend on behalf of `owner` through {transferFrom}. This is
* zero by default.
*
* This value changes when {approve} or {transferFrom} are called.
*/
function allowance(address owner, address spender) external view returns (uint256);
/**
* @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* IMPORTANT: Beware that changing an allowance with this method brings the risk
* that someone may use both the old and the new allowance by unfortunate
* transaction ordering. One possible solution to mitigate this race
* condition is to first reduce the spender's allowance to 0 and set the
* desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
*
* Emits an {Approval} event.
*/
function approve(address spender, uint256 amount) external returns (bool);
/**
* @dev Moves `amount` tokens from `sender` to `recipient` using the
* allowance mechanism. `amount` is then deducted from the caller's
* allowance.
*
* Returns a boolean value indicating whether the operation succeeded.
*
* Emits a {Transfer} event.
*/
function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
/**
* @dev Emitted when `value` tokens are moved from one account (`from`) to
* another (`to`).
*
* Note that `value` may be zero.
*/
event Transfer(address indexed from, address indexed to, uint256 value);
/**
* @dev Emitted when the allowance of a `spender` for an `owner` is set by
* a call to {approve}. `value` is the new allowance.
*/
event Approval(address indexed owner, address indexed spender, uint256 value);
}
library Address {
/**
* @dev Returns true if `account` is a contract.
*
* [IMPORTANT]
* ====
* It is unsafe to assume that an address for which this function returns
* false is an externally-owned account (EOA) and not a contract.
*
* Among others, `isContract` will return false for the following
* types of addresses:
*
* - an externally-owned account
* - a contract in construction
* - an address where a contract will be created
* - an address where a contract lived, but was destroyed
* ====
*/
function isContract(address account) internal view returns (bool) {
// According to EIP-1052, 0x0 is the value returned for not-yet created accounts
// and 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470 is returned
// for accounts without code, i.e. `keccak256('')`
bytes32 codehash;
bytes32 accountHash = 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470;
// solhint-disable-next-line no-inline-assembly
assembly { codehash := extcodehash(account) }
return (codehash != accountHash && codehash != 0x0);
}
/**
* @dev Converts an `address` into `address payable`. Note that this is
* simply a type cast: the actual underlying value is not changed.
*
* _Available since v2.4.0._
*/
function toPayable(address account) internal pure returns (address payable) {
return address(uint160(account));
}
/**
* @dev Replacement for Solidity's `transfer`: sends `amount` wei to
* `recipient`, forwarding all available gas and reverting on errors.
*
* https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
* of certain opcodes, possibly making contracts go over the 2300 gas limit
* imposed by `transfer`, making them unable to receive funds via
* `transfer`. {sendValue} removes this limitation.
*
* https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
*
* IMPORTANT: because control is transferred to `recipient`, care must be
* taken to not create reentrancy vulnerabilities. Consider using
* {ReentrancyGuard} or the
* https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
*
* _Available since v2.4.0._
*/
function sendValue(address payable recipient, uint256 amount) internal {
require(address(this).balance >= amount, "Address: insufficient");
// solhint-disable-next-line avoid-call-value
(bool success, ) = recipient.call{value:amount}("");
require(success, "Address: reverted");
}
}
library SafeERC20 {
using SafeMath for uint256;
using Address for address;
function safeTransfer(IERC20 token, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
}
function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
}
function safeApprove(IERC20 token, address spender, uint256 value) internal {
// safeApprove should only be called when setting an initial allowance,
// or when resetting it to zero. To increase and decrease it, use
// 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
// solhint-disable-next-line max-line-length
require((value == 0) || (token.allowance(address(this), spender) == 0),
"SafeERC20: approve from non-zero to non-zero allowance"
);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
}
function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).add(value);
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: < 0");
callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
}
/**
* @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
* on the return value: the return value is optional (but if data is returned, it must not be false).
* @param token The token targeted by the call.
* @param data The call data (encoded using abi.encode or one of its variants).
*/
function callOptionalReturn(IERC20 token, bytes memory data) private {
// We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
// we're implementing it ourselves.
// A Solidity high level call has three parts:
// 1. The target address is checked to verify it contains contract code
// 2. The call itself is made, and success asserted
// 3. The return value is decoded, which in turn checks the size of the returned data.
// solhint-disable-next-line max-line-length
require(address(token).isContract(), "SafeERC20: !contract");
// solhint-disable-next-line avoid-low-level-calls
(bool success, bytes memory returndata) = address(token).call(data);
require(success, "SafeERC20: low-level call failed");
if (returndata.length > 0) { // Return data is optional
// solhint-disable-next-line max-line-length
require(abi.decode(returndata, (bool)), "SafeERC20: !succeed");
}
}
}
interface IKeep3rV1Helper {
function getQuoteLimit(uint gasUsed) external view returns (uint);
}
contract KeeperV1Jobs is ReentrancyGuard {
using SafeMath for uint;
using SafeERC20 for IERC20;
/// @notice Keep3r Helper to set max prices for the ecosystem
IKeep3rV1Helper public KPRH;
IERC20 public kp4r;
/// @notice The EIP-712 typehash for the contract's domain
bytes32 public constant DOMAIN_TYPEHASH = keccak256("EIP712Domain(string name,uint chainId,address verifyingContract)");
bytes32 public immutable DOMAINSEPARATOR;
/// @notice The EIP-712 typehash for the delegation struct used by the contract
bytes32 public constant DELEGATION_TYPEHASH = keccak256("Delegation(address delegatee,uint nonce,uint expiry)");
/// @notice The EIP-712 typehash for the permit struct used by the contract
bytes32 public constant PERMIT_TYPEHASH = keccak256("Permit(address owner,address spender,uint value,uint nonce,uint deadline)");
function safe32(uint n, string memory errorMessage) internal pure returns (uint32) {
require(n < 2**32, errorMessage);
return uint32(n);
}
/// @notice Submit a job
event SubmitJob(address indexed job, address indexed liquidity, address indexed provider, uint block, uint credit);
/// @notice Apply credit to a job
event ApplyCredit(address indexed job, address indexed liquidity, address indexed provider, uint block, uint credit);
/// @notice Remove credit for a job
event RemoveJob(address indexed job, address indexed liquidity, address indexed provider, uint block, uint credit);
/// @notice Unbond credit for a job
event UnbondJob(address indexed job, address indexed liquidity, address indexed provider, uint block, uint credit);
/// @notice Added a Job
event JobAdded(address indexed job, uint block, address governance);
/// @notice Removed a job
event JobRemoved(address indexed job, uint block, address governance);
/// @notice Worked a job
event KeeperWorked(address indexed credit, address indexed job, address indexed keeper, uint block);
/// @notice Keeper bonding
event KeeperBonding(address indexed keeper, uint block, uint active, uint bond);
/// @notice Keeper bonded
event KeeperBonded(address indexed keeper, uint block, uint activated, uint bond);
/// @notice Keeper unbonding
event KeeperUnbonding(address indexed keeper, uint block, uint deactive, uint bond);
/// @notice Keeper unbound
event KeeperUnbound(address indexed keeper, uint block, uint deactivated, uint bond);
/// @notice Keeper slashed
event KeeperSlashed(address indexed keeper, address indexed slasher, uint block, uint slash);
/// @notice Keeper disputed
event KeeperDispute(address indexed keeper, uint block);
/// @notice Keeper resolved
event KeeperResolved(address indexed keeper, uint block);
event AddCredit(address indexed credit, address indexed job, address indexed creditor, uint block, uint amount);
/// @notice 1 day to bond to become a keeper
uint public BOND = 1 days;
/// @notice 14 days to unbond to remove funds from being a keeper
uint public UNBOND = 14 days;
/// @notice direct liquidity fee 0.3%
uint public FEE = 30;
uint public BASE = 10000;
/// @notice address used for ETH transfers
address constant public ETH = address(0xE);
/// @notice tracks all current bondings (time)
mapping(address => mapping(address => uint)) public bondings;
/// @notice tracks all current unbondings (time)
mapping(address => mapping(address => uint)) public unbondings;
/// @notice allows for partial unbonding
mapping(address => mapping(address => uint)) public partialUnbonding;
/// @notice tracks all current pending bonds (amount)
mapping(address => mapping(address => uint)) public pendingbonds;
/// @notice tracks how much a keeper has bonded
mapping(address => mapping(address => uint)) public bonds;
/// @notice tracks underlying votes (that don't have bond)
mapping(address => uint) public votes;
/// @notice total bonded (totalSupply for bonds)
uint public totalBonded = 0;
/// @notice tracks when a keeper was first registered
mapping(address => uint) public firstSeen;
/// @notice tracks if a keeper has a pending dispute
mapping(address => bool) public disputes;
/// @notice tracks last job performed for a keeper
mapping(address => uint) public lastJob;
/// @notice tracks the total job executions for a keeper
mapping(address => uint) public workCompleted;
/// @notice list of all jobs registered for the keeper system
mapping(address => bool) public jobs;
/// @notice the current credit available for a job
mapping(address => mapping(address => uint)) public credits;
/// @notice the balances for the liquidity providers
mapping(address => mapping(address => mapping(address => uint))) public liquidityProvided;
/// @notice liquidity unbonding days
mapping(address => mapping(address => mapping(address => uint))) public liquidityUnbonding;
/// @notice liquidity unbonding amounts
mapping(address => mapping(address => mapping(address => uint))) public liquidityAmountsUnbonding;
/// @notice job proposal delay
mapping(address => uint) public jobProposalDelay;
/// @notice liquidity apply date
mapping(address => mapping(address => mapping(address => uint))) public liquidityApplied;
/// @notice liquidity amount to apply
mapping(address => mapping(address => mapping(address => uint))) public liquidityAmount;
/// @notice list of all current keepers
mapping(address => bool) public keepers;
/// @notice blacklist of keepers not allowed to participate
mapping(address => bool) public blacklist;
/// @notice traversable array of keepers to make external management easier
address[] public keeperList;
/// @notice traversable array of jobs to make external management easier
address[] public jobList;
/// @notice governance address for the governance contract
address public governance;
address public pendingGovernance;
/// @notice the liquidity token supplied by users paying for jobs
mapping(address => bool) public liquidityAccepted;
address[] public liquidityPairs;
uint internal _gasUsed;
constructor(address _kp4r) public {
// Set governance for this token
kp4r = IERC20(_kp4r);
governance = msg.sender;
DOMAINSEPARATOR = keccak256(abi.encode(DOMAIN_TYPEHASH, keccak256(bytes("Keep4r")), _getChainId(), address(this)));
}
/**
* @notice Add ETH credit to a job to be paid out for work
* @param job the job being credited
*/
function addCreditETH(address job) external payable {
require(jobs[job], "addCreditETH: !job");
uint _fee = msg.value.mul(FEE).div(BASE);
credits[job][ETH] = credits[job][ETH].add(msg.value.sub(_fee));
payable(governance).transfer(_fee);
emit AddCredit(ETH, job, msg.sender, block.number, msg.value);
}
/**
* @notice Add credit to a job to be paid out for work
* @param credit the credit being assigned to the job
* @param job the job being credited
* @param amount the amount of credit being added to the job
*/
function addCredit(address credit, address job, uint amount) external nonReentrant {
require(jobs[job], "addCreditETH: !job");
uint _before = IERC20(credit).balanceOf(address(this));
IERC20(credit).safeTransferFrom(msg.sender, address(this), amount);
uint _received = IERC20(credit).balanceOf(address(this)).sub(_before);
uint _fee = _received.mul(FEE).div(BASE);
credits[job][credit] = credits[job][credit].add(_received.sub(_fee));
IERC20(credit).safeTransfer(governance, _fee);
emit AddCredit(credit, job, msg.sender, block.number, _received);
}
/**
* @notice Displays all accepted liquidity pairs
*/
function pairs() external view returns (address[] memory) {
return liquidityPairs;
}
/**
* @notice Implemented by jobs to show that a keeper performed work
* @param keeper address of the keeper that performed the work
*/
function worked(address keeper) external {
workReceipt(keeper, KPRH.getQuoteLimit(_gasUsed.sub(gasleft())));
}
/**
* @notice Implemented by jobs to show that a keeper performed work
* @param keeper address of the keeper that performed the work
* @param amount the reward that should be allocated
*/
function workReceipt(address keeper, uint amount) public {
require(jobs[msg.sender], "workReceipt: !job");
require(amount <= KPRH.getQuoteLimit(_gasUsed.sub(gasleft())), "workReceipt: max limit");
credits[msg.sender][address(this)] = credits[msg.sender][address(this)].sub(amount, "workReceipt: insuffient funds");
lastJob[keeper] = now;
_bond(address(this), keeper, amount);
workCompleted[keeper] = workCompleted[keeper].add(amount);
emit KeeperWorked(address(this), msg.sender, keeper, block.number);
}
/**
* @notice Implemented by jobs to show that a keeper performed work
* @param credit the asset being awarded to the keeper
* @param keeper address of the keeper that performed the work
* @param amount the reward that should be allocated
*/
function receipt(address credit, address keeper, uint amount) external {
require(jobs[msg.sender], "receipt: !job");
credits[msg.sender][credit] = credits[msg.sender][credit].sub(amount, "workReceipt: insuffient funds");
lastJob[keeper] = now;
IERC20(credit).safeTransfer(keeper, amount);
emit KeeperWorked(credit, msg.sender, keeper, block.number);
}
/**
* @notice Implemented by jobs to show that a keeper performed work
* @param keeper address of the keeper that performed the work
* @param amount the amount of ETH sent to the keeper
*/
function receiptETH(address keeper, uint amount) external {
require(jobs[msg.sender], "receipt: !job");
credits[msg.sender][ETH] = credits[msg.sender][ETH].sub(amount, "workReceipt: insuffient funds");
lastJob[keeper] = now;
payable(keeper).transfer(amount);
emit KeeperWorked(ETH, msg.sender, keeper, block.number);
}
function _bond(address bonding, address _from, uint _amount) internal {
bonds[_from][bonding] = bonds[_from][bonding].add(_amount);
if (bonding == address(this)) {
totalBonded = totalBonded.add(_amount);
// _moveDelegates(address(0), delegates[_from], _amount);
}
}
function _unbond(address bonding, address _from, uint _amount) internal {
bonds[_from][bonding] = bonds[_from][bonding].sub(_amount);
if (bonding == address(this)) {
totalBonded = totalBonded.sub(_amount);
// _moveDelegates(delegates[_from], address(0), _amount);
}
}
/**
* @notice Allows governance to add new job systems
* @param job address of the contract for which work should be performed
*/
function addJob(address job) external {
require(msg.sender == governance, "addJob: !gov");
require(!jobs[job], "addJob: job known");
jobs[job] = true;
jobList.push(job);
emit JobAdded(job, block.number, msg.sender);
}
/**
* @notice Full listing of all jobs ever added
* @return array blob
*/
function getJobs() external view returns (address[] memory) {
return jobList;
}
/**
* @notice Allows governance to remove a job from the systems
* @param job address of the contract for which work should be performed
*/
function removeJob(address job) external {
require(msg.sender == governance, "removeJob: !gov");
jobs[job] = false;
emit JobRemoved(job, block.number, msg.sender);
}
/**
* @notice Allows governance to change the Keep3rHelper for max spend
* @param _kprh new helper address to set
*/
function setKeep3rHelper(address _kprh) external {
require(msg.sender == governance, "setKeep3rHelper: !gov");
KPRH = IKeep3rV1Helper(_kprh);
}
/**
* @notice Allows governance to change governance (for future upgradability)
* @param _governance new governance address to set
*/
function setGovernance(address _governance) external {
require(msg.sender == governance, "setGovernance: !gov");
pendingGovernance = _governance;
}
/**
* @notice Allows pendingGovernance to accept their role as governance (protection pattern)
*/
function acceptGovernance() external {
require(msg.sender == pendingGovernance, "acceptGovernance: !pendingGov");
governance = pendingGovernance;
}
/**
* @notice confirms if the current keeper is registered, can be used for general (non critical) functions
* @param keeper the keeper being investigated
* @return true/false if the address is a keeper
*/
function isKeeper(address keeper) external returns (bool) {
_gasUsed = gasleft();
return keepers[keeper];
}
/**
* @notice confirms if the current keeper is registered and has a minimum bond, should be used for protected functions
* @param keeper the keeper being investigated
* @param minBond the minimum requirement for the asset provided in bond
* @param earned the total funds earned in the keepers lifetime
* @param age the age of the keeper in the system
* @return true/false if the address is a keeper and has more than the bond
*/
function isMinKeeper(address keeper, uint minBond, uint earned, uint age) external returns (bool) {
_gasUsed = gasleft();
return keepers[keeper]
&& bonds[keeper][address(this)].add(votes[keeper]) >= minBond
&& workCompleted[keeper] >= earned
&& now.sub(firstSeen[keeper]) >= age;
}
/**
* @notice confirms if the current keeper is registered and has a minimum bond, should be used for protected functions
* @param keeper the keeper being investigated
* @param bond the bound asset being evaluated
* @param minBond the minimum requirement for the asset provided in bond
* @param earned the total funds earned in the keepers lifetime
* @param age the age of the keeper in the system
* @return true/false if the address is a keeper and has more than the bond
*/
function isBondedKeeper(address keeper, address bond, uint minBond, uint earned, uint age) external returns (bool) {
_gasUsed = gasleft();
return keepers[keeper]
&& bonds[keeper][bond] >= minBond
&& workCompleted[keeper] >= earned
&& now.sub(firstSeen[keeper]) >= age;
}
/**
* @notice begin the bonding process for a new keeper
* @param bonding the asset being bound
* @param amount the amount of bonding asset being bound
*/
function bond(address bonding, uint amount) external nonReentrant {
require(!blacklist[msg.sender], "bond: blacklisted");
require(bonding != address(this), "cannot bond this");
bondings[msg.sender][bonding] = now.add(BOND);
uint _before = IERC20(bonding).balanceOf(address(this));
IERC20(bonding).safeTransferFrom(msg.sender, address(this), amount);
amount = IERC20(bonding).balanceOf(address(this)).sub(_before);
pendingbonds[msg.sender][bonding] = pendingbonds[msg.sender][bonding].add(amount);
emit KeeperBonding(msg.sender, block.number, bondings[msg.sender][bonding], amount);
}
/**
* @notice get full list of keepers in the system
*/
function getKeepers() external view returns (address[] memory) {
return keeperList;
}
/**
* @notice allows a keeper to activate/register themselves after bonding
* @param bonding the asset being activated as bond collateral
*/
function activate(address bonding) external {
require(!blacklist[msg.sender], "activate: blacklisted");
require(bondings[msg.sender][bonding] != 0 && bondings[msg.sender][bonding] < now, "connect yet activate bonding");
if (firstSeen[msg.sender] == 0) {
firstSeen[msg.sender] = now;
keeperList.push(msg.sender);
lastJob[msg.sender] = now;
}
keepers[msg.sender] = true;
_bond(bonding, msg.sender, pendingbonds[msg.sender][bonding]);
pendingbonds[msg.sender][bonding] = 0;
emit KeeperBonded(msg.sender, block.number, block.timestamp, bonds[msg.sender][bonding]);
}
/**
* @notice begin the unbonding process to stop being a keeper
* @param bonding the asset being unbound
* @param amount allows for partial unbonding
*/
function unbond(address bonding, uint amount) external {
unbondings[msg.sender][bonding] = now.add(UNBOND);
_unbond(bonding, msg.sender, amount);
partialUnbonding[msg.sender][bonding] = partialUnbonding[msg.sender][bonding].add(amount);
emit KeeperUnbonding(msg.sender, block.number, unbondings[msg.sender][bonding], amount);
}
/**
* @notice withdraw funds after unbonding has finished
* @param bonding the asset to withdraw from the bonding pool
*/
function withdraw(address bonding) external nonReentrant {
require(unbondings[msg.sender][bonding] != 0 && unbondings[msg.sender][bonding] < now, "withdraw: unbonding");
require(!disputes[msg.sender], "withdraw: disputes");
IERC20(bonding).safeTransfer(msg.sender, partialUnbonding[msg.sender][bonding]);
emit KeeperUnbound(msg.sender, block.number, block.timestamp, partialUnbonding[msg.sender][bonding]);
partialUnbonding[msg.sender][bonding] = 0;
}
/**
* @notice allows governance to create a dispute for a given keeper
* @param keeper the address in dispute
*/
function dispute(address keeper) external {
require(msg.sender == governance, "dispute: !gov");
disputes[keeper] = true;
emit KeeperDispute(keeper, block.number);
}
/**
* @notice allows governance to slash a keeper based on a dispute
* @param bonded the asset being slashed
* @param keeper the address being slashed
* @param amount the amount being slashed
*/
function slash(address bonded, address keeper, uint amount) public nonReentrant {
require(msg.sender == governance, "slash: !gov");
IERC20(bonded).safeTransfer(governance, amount);
_unbond(bonded, keeper, amount);
disputes[keeper] = false;
emit KeeperSlashed(keeper, msg.sender, block.number, amount);
}
/**
* @notice blacklists a keeper from participating in the network
* @param keeper the address being slashed
*/
function revoke(address keeper) external {
require(msg.sender == governance, "slash: !gov");
keepers[keeper] = false;
blacklist[keeper] = true;
slash(address(this), keeper, bonds[keeper][address(this)]);
}
/**
* @notice allows governance to resolve a dispute on a keeper
* @param keeper the address cleared
*/
function resolve(address keeper) external {
require(msg.sender == governance, "resolve: !gov");
disputes[keeper] = false;
emit KeeperResolved(keeper, block.number);
}
function setBondingTimes(uint256 _BOND, uint256 _UNBOND) public {
require(msg.sender == governance, "setBondingTimes: !gov");
require(_UNBOND < 21 days, "unbond time too long");
UNBOND = _UNBOND;
BOND = _BOND;
}
function setFees(uint256 _FEE) public {
require(msg.sender == governance, "setFee: !gov");
require(_FEE < 500, "fee to big");
FEE = _FEE;
}
function _getChainId() internal pure returns (uint) {
uint chainId;
assembly { chainId := chainid() }
return chainId;